2014 Chrysler 300 Owner Manual - Page 257

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 PARKSENSE® FRONT AND REAR PARK ASSIST - IF EQUIPPED The ParkSense® Park Assist system provides visual and audible indications of the distance between the rear and/or front fascia and a detected obstacle when backing up or moving forward, e.g. during a parking maneuver. Refer to ParkSense® System Usage Precautions for limitations of this system and recommendations. ParkSense® Sensors The four ParkSense® sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors' field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 59 in (150 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle. 3 ParkSense® will retain the last system state (enabled or The six ParkSense® sensors, located in the front fascia/ disabled) from the last ignition cycle when the ignition is bumper, monitor the area in front of the vehicle that is within the sensors' field of view. The sensors can detect changed to the ON/RUN position. obstacles from approximately 12 in (30 cm) up to 47 in ParkSense® can be active only when the shift lever is in (120 cm) from the front fascia/bumper in the horizontal REVERSE or DRIVE. If ParkSense® is enabled at one of direction, depending on the location, type and orientathese shift lever positions, the system will remain active tion of the obstacle. until the vehicle speed is increased to approximately 7 mph (11 km/h) or above. The system will become active again if the vehicle speed is decreased to speeds less than approximately 6 mph (9 km/h).