2014 Chrysler 300 Owner Manual - Page 574

572 MAINTAINING YOUR VEHICLE Rear Backup Lamp And Turn Signal Lamps 1. Open the trunk. 8. Continue removing lamp from vehicle in order to access the bulb(s). 9. Turn the appropriate bulb and socket assembly coun2. Remove the trunk trim by removing the grocery hook terclockwise to remove it from the tail lamp assembly. (using a T-20 torque driver or similar tool), remove the fastener, and pull back the weather strip. 10. Disconnect the bulb from the socket assembly and install the replacement bulb. 3. Pull back the trunk liner to gain access to the tail lamp 11. Reinstall the bulb and socket assembly into the tail wing nuts. lamp assembly, and then turn it clockwise. 4. Remove the three wing nuts from the back of the tail lamp assembly. 12. Reinstall the tail lamp assembly, fasteners, electrical connector, and trunk trim. 5. Pull the tail lamp assembly away from the vehicle enough to access the electrical connector. 13. Close the trunk. 6. Push the electrical connector locking tab to the side. 7. Disconnect the electrical connector.