2014 Chrysler 300 Owner Manual - Page 468

466 STARTING AND OPERATING For best results, a refueling pattern that avoids alternating • Some additives used in regular gasoline are not fully compatible with E-85 and may form deposits in your between E-85 and unleaded gasoline is recommended. engine. To eliminate driveability issues that may be When you do switch fuel types it is recommended that: caused by these deposits, a supplemental gasoline • You do not add less than 5 gallons (19 Liters) when additive, such as MOPAR® Injector Cleanup or refueling. Techron may be used. • You drive the vehicle immediately after refueling for at Selection Of Engine Oil For Flexible Fuel Vehicles least 5 miles (8 km). (E-85) And Gasoline Vehicles Observing these precautions will avoid possible hard FFV vehicles operated on E-85 require specially formustarting and/or significant deterioration in driveability lated engine oils. These special requirements are included during warm up. in MOPAR® engine oils, and in equivalent oils meeting Chrysler Specification MS-6395. The manufacturer only NOTE: recommends engine oils that are API Certified and meet • Use seasonally adjusted E-85 fuel (ASTM D5798). With the requirements of Material Standard MS-6395. MS-6395 non-seasonally adjusted E-85 fuel, you may experience contains additional requirements, developed during exhard starting and rough idle following start up even if tensive fleet testing, to provide additional protection to the above recommendations are followed, especially Chrysler Group LLC engines. Use MOPAR® or an when the ambient temperature is below 32°F (0°C). equivalent oil meeting the specification MS-6395.