2014 Chrysler 300 Owner Manual - Page 263

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 ParkSense® will retain its last known configuration state Service The ParkSense® Park Assist System through ignition cycles. During vehicle start up, when the ParkSense® Park Assist system has detected a fault condition, the ElecEnabling And Disabling ParkSense® tronic Vehicle Information Center (EVIC) will actuate a ParkSense® can be enabled and disabled using the single chime, once per ignition cycle, and it will display Uconnect® System. The available choices are: Off, Sound the "CLEAN PARK ASSIST", "SERVICE PARK ASSIST" Only, or Sound and Display. Refer to "Uconnect® Setor the "SERVICE PARK ASSIST SYSTEM" message for tings" in "Understanding Your Instrument Panel" for five seconds. Refer to "Electronic Vehicle Information further information. Center (EVIC)" in "Understanding Your Instrument When the ParkSense® soft-key is pressed to disable the Panel" for further information. When the shift lever is system, the EVIC will display the "PARK ASSIST SYS- moved to REVERSE and the system has detected a fault TEM OFF" message for approximately five seconds. condition, the EVIC will display the ЉCLEAN PARK Refer to "Electronic Vehicle Information Center (EVIC)" ASSISTЉ, ЉSERVICE PARK ASSISTЉ, or ЉSERVICE PARK in "Understanding Your Instrument Panel" for further ASSIST SYSTEMЉ message for as long as the vehicle is in information. When the shift lever is moved to REVERSE REVERSE. Under this condition, ParkSense® will not position and ParkSense® is turned off, the instrument operate. cluster will display "PARK ASSIST OFF" message for as long as the vehicle is in REVERSE. 3