2014 Chrysler 300 Owner Manual - Page 57

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 As a guide, if you are shorter than average you will 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of prefer a lower position, and if you are taller than average the latch plate. you will prefer a higher position. When you release the anchorage try to move it up and down to make sure that 4. Continue to slide the latch plate up until it clears the it is locked in position. folded webbing. In the rear seat, move toward the center of the seat to Seat Belts In Passenger Seating Positions position the belt away from your neck. The seat belts in the passenger seating positions are Lap/Shoulder Belt Untwisting Procedure equipped with Automatic Locking Retractors (ALR) Use the following procedure to untwist a twisted lap/ which are used to secure a child restraint system. For shoulder belt. additional information, refer to "Installing Child Restraints Using The Vehicle Seat Belt" under the "Child 1. Position the latch plate as close as possible to the Restraints" section. The chart below defines the type of anchor point. feature for each seating position. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, Driver Center Passenger grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. First Row N/A N/A ALR 2