2014 Chrysler 300 Owner Manual - Page 31

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 To Enter Remote Start Mode • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, Press and release the REMOTE START button the ignition must be cycled to the RUN position before on the RKE transmitter twice within five secyou can repeat the start sequence for a third cycle. onds. The vehicle doors will lock, parking lights will flash and the horn will chirp twice (if To Exit Remote Start Mode Without Driving The programmed). Then, the engine will start and the vehicle Vehicle will remain in the Remote Start mode for a 15-minute Push and release the REMOTE START button one time or cycle. allow the engine to run for the entire 15-minute cycle. NOTE: NOTE: To avoid unintentional shutdowns, the system • If an engine fault is present or fuel level is low, the will disable the one time push of the REMOTE START vehicle will start and then shut down in 10 seconds. button for two seconds after receiving a valid Remote Start request. • The park lamps will turn on and remain on during Remote Start mode. • For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is in the Remote Start mode. 2