2014 Chrysler 300 Owner Manual - Page 365

UNDERSTANDING YOUR INSTRUMENT PANEL 363 9. SYNC Press the Sync soft-key to toggle the Sync feature On/Off. The Sync indicator is illuminated when this feature is enabled. Sync is used to synchronize the passenger temperature setting with the driver temperature setting. Changing the passenger temperature setting while in Sync will automatically exit this feature. 10. Blower Control Soft-Key Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting. Blower can also be selected by pressing the blower bar area between the icons. 11. Modes The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, Blower control is used to regulate the amount of air forced demist outlets and defrost outlets. The Mode settings are through the climate system. There are seven blower speeds as follows: available. Adjusting the blower will cause automatic mode • Panel Mode to switch to manual operation. The speeds can be selected Air comes from the outlets in the instrument using either hard-keys or soft-keys as follows: panel. Each of these outlets can be individually Hard-Key adjusted to direct the flow of air. The air vanes of the The blower speed increases as you turn the control center outlets and outboard outlets can be moved up clockwise from the lowest blower setting. The blower and down or side to side to regulate airflow direction. speed decreases as you turn the knob counterclockwise. 4