2012 Dodge Challenger Owner Manual SRT8 - Page 159

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 3. Simultaneously press and hold both the Homelink௡ On some garage door openers/devices there may be a button you want to program and the hand-held transmit- light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. ter button. 4. Continue to hold buttons until the EVIC display NOTE: You have 30 seconds in which to initiate the next changes from "CHANNEL # TRAINING" to "CHAN- step after the LEARN button has been pressed. NEL # TRAINED", then release both buttons. 6. Return to the vehicle and press the programmed HomeLink௡ button twice (holding the button for two NOTE: • It may take up to 30 seconds or longer in some cased seconds each time). The EVIC will display "CHANNEL # TRANSMIT". If the garage door opener/device activates, for the channel to train. programming is complete. • If the EVIC displays "DID NOT TRAIN" repeat from Step 2. NOTE: If the garage door opener/device does not activate, press the button a third time (for two seconds) to 5. At the garage door opener motor (in the garage), complete the training. locate the "LEARN" or "TRAINING" button. This can usually be found where the hanging antenna wire is To program the remaining two HomeLink௡ buttons, attached to the garage door opener/device motor. Firmly repeat each step for each remaining button. DO NOT press and release the "LEARN" or "TRAINING" button. erase the channels. 3