2012 Dodge Challenger Owner Manual SRT8 - Page 351

WHAT TO DO IN EMERGENCIES 349 (B) Setting Up To Use TIREFIT: 1. Turn the Mode Select Knob (5) to the Sealant Mode position. (C) Injecting TIREFIT Sealant Into The Deflated Tire: • Always start the engine before turning ON the TIREFIT kit. 2. Uncoil the Sealant Hose (6) and then remove the cap NOTE: Manual transmission vehicles must have the from the fitting at the end of the hose. parking brake engaged and the shift lever in NEUTRAL. 3. Place the TIREFIT kit flat on the ground next to the • After pressing the Power Button (4), the sealant (white fluid) will flow from the Sealant Bottle (1) through the deflated tire. Sealant Hose (6) and into the tire. 4. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (6) onto the NOTE: Sealant may leak out through the puncture in the tire. valve stem. 5. Uncoil the Power Plug (8) and insert the plug into the If the sealant (white fluid) does not flow within 0 - 10 seconds through the Sealant Hose (6): vehicle's 12 Volt power outlet. NOTE: Do not remove foreign objects (e.g., screws or 1. Press the Power Button (4) to turn Off the TIREFIT kit. Disconnect the Sealant Hose (6) from the valve stem. nails) from the tire. Make sure the valve stem is free of debris. Reconnect the Sealant Hose (6) to the valve stem. Check that the Mode 6