2012 Dodge Challenger Owner Manual SRT8 - Page 408

406 MAINTAINING YOUR VEHICLE NOTE: On vehicles equipped with HID headlamps, 4. Install the bulb and socket assembly into the housing, when the headlamps are turned on, there is a blue hue to and rotate the socket clockwise to lock it in place. the lamps. This diminishes and becomes more white after 5. Reinstall the front/rear side marker. approximately 10 seconds, as the system charges. Tail/Turn And Stop Lamp Front/Rear Side Marker Lamp 1. Open the trunk. 1. Remove the front/rear side marker. Use a fiber stick or similar tool to gently pry the lamp on the outboard side 2. Using a screwdriver, remove the tail lamp retainer. to disengage the clip. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. 2. Rotate the bulb's socket counterclockwise, and remove the bulb and socket assembly from the housing. 3. Pull the bulb out of the socket and insert the replacement bulb.