2012 Dodge Challenger Owner Manual SRT8 - Page 358
2012 Dodge Challenger Manual
Page 358 highlights
356 WHAT TO DO IN EMERGENCIES CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. WARNING! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start 2. Connect the opposite end of the positive (+) jumper the engine in the vehicle with the discharged battery. cable to the positive (+) post of the booster battery. Once the engine is started, remove the jumper cables in 3. Connect the negative end (-) of the jumper cable to the the reverse sequence: negative (-) post of the booster battery. 6. Disconnect the negative (-) jumper cable from the 4. Connect the opposite end of the negative (-) jumper remote negative (-) post of the vehicle with the discable to the remote negative (-) post of the vehicle with charged battery. the discharged battery. 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery.