2000 Honda CR-V Owner's Manual - Page 205

Cooling System 9. Start the engine and let it run for about 30 seconds. Then turn off the engine. 10.Check the level in the radiator, add coolant if needed. RESERVE TANK 14.Remove the radiator cap. 15.Pour coolant into the radiator up to the base of the filler neck and into the reserve tank up to the MAX mark. 16.Start the engine and hold it at 1,500 rpm until the radiator fan comes on. Turn off the engine. Check the coolant level in the radiator and add coolant if needed. 11.Fill the reserve tank to the MAX mark. Install the reserve tank cap. 12.Install the radiator cap, and tighten it to the first stop. 13.Start the engine and let it run until the radiator fan comes on two times. Then stop the engine. 17.Install the radiator cap, and tighten it fully. 18.If necessary, fill the reserve tank to the MAX mark. Install the reserve tank cap. Maintenance