2000 Honda CR-V Owner's Manual - Page 260
2000 Honda CR-V Manual
Page 260 highlights
Jump Starting BOOSTER BATTERY 3. Connect one jumper cable to the positive ( + ) terminal on the booster battery. Connect the other end to the positive ( + ) terminal on your Honda's battery. 4. Connect the second jumper cable to the negative (-) terminal on the booster battery. Connect the other end to the ground wire on the right side of the engine as shown. Do not connect this juniper cable to any other part of the engine. 5. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. 6. Start your vehicle. If the starter motor still operates slowly, check the jumper cable connections to make sure they have good metalto-metal contact. 7. Once your vehicle is running, disconnect the negative cable from your vehicle, then from the booster battery. Disconnect the positive cable from your vehicle, then the booster battery. Taking Care of the Unexpected