2000 Honda CR-V Owner's Manual - Page 234

Lights 6. Install the new bulb in the socket. 7. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 8. Test the lights to make sure the new bulb is working. 9. Put the inner fender cover in place. Install the fastener and push on the center until it locks (the center is flush with the head). 3. Pull the inner fender cover back. 4. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 5. To remove the turn signal/side marker bulb, push it in slightly and turn it counterclockwise. To remove the parking light bulb, pull it straight out of its socket. 1. Open the tailgate. Remove the three screws and remove the rear light assembly from the rear pillar. 2. Determine which of the three bulbs is burned out: stop/taillight , turn signal light or back-up light. Replacing Rear Bulbs Maintenance