2001 Nissan Quest Owner's Manual - Page 82

● Before placing the child in the integrated child safety seat, confirm that the bench seatback is securely locked and the seatback release lever is in full down position. ● Always make sure the integrated child safety seat belts are properly positioned on your child. The child should sit straight up and back against the bench seat. The shoulder harnesses should be centered over the shoulders and fastened with the chest clip. The belt buckle should be between the legs and latched to the shoulder belt tongue. Snugly adjust the belts around your child. Failure to properly position the child can increase the risk or severity of injury to the child in an accident. CAUTION Remember that a child restraint left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the child restraint. Securing the child Before using the integrated child safety seats, carefully read the shoulder harness, seatback release, and integrated child safety seat cushion labels. The following steps apply to both the left and right integrated child safety seats. 1. Be sure your child meets all of the required age, weight and height requirements for the safe use of the integrated child safety seat. 2. Be sure the second row bench seat is securely latched to the floor of the vehicle. Refer to ''Flexible seating'' in this section for proper seat installation procedures. 3. Be sure the second row bench seatback is locked by grasping it and trying to rock it back and forth. Also, check that the seatback release lever is in the full down position. Seats, restraints and supplemental air bag systems 1-75