2005 Nissan Murano Owner's Manual - Page 177

FM-AM-SAT RADIO WITH CASSETTE PLAYER AND/OR COMPACT DISC (CD) PLAYER (TYPE A)/CD CHANGER (TYPE B) No satellite radio reception is available and "NO SAT" will be displayed when the SAT button is pushed unless the optional satellite receiver and antenna were factory installed (late availability only/retrofit unavailable), and an XM or SIRIUSTM satellite radio service subscription is active. system is on, pushing the ON⋅OFF/Volume control knob turns the system off. To turn the radio off, push the Power/Volume control knob. Turn the ON⋅OFF/Volume control knob to adjust the volume. This vehicle has Speed Sensitive control Volume (SSV) for audio (type B only). The audio volume changes as the driving speed changes. AUDIO knob (BASS, TREBLE, FADE, BALANCE, (SSV and NR (Dolby) - type B only)): Push the AUDIO knob to change the selecting mode as follows. BASS → TREBLE → FADE → BALANCE → SSV (type B only) → NR (when cassette playing type B only) To adjust BASS, Treble, Fader and Balance, push the AUDIO knob until the desired mode BASS, TREBLE, FADE or BALANCE appears in the display. Turn the Tuning knob to adjust Bass and Treble to the desired level. Use the Tuning knob also to adjust Fader or Balance modes. Fader adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. To change the SSV mode to OFF, LOW, MID or HIGH, turn the Tuning knob to right or left. (type B only). To change the NR (Dolby) mode to OFF or ON, turn the Tuning knob to right or left while cassette tape is playing. When Dolby is ON, the display indicates the mark. (type B only) Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation. Dolby NR and the double-D symbol " are trademarks of Dolby Laboratories " Licensing Corporation. After 10 seconds, the radio, cassette tape or CD display reappears. Once the sound quality is set to the desired level, push the AUDIO button repeatedly until the radio, cassette tape or CD display appears. Display CD text: To indicate the CD mode text, push the AUDIO knob during CD playing. Track No. → Track title → Disc title → BASS → TREBLE → FADE → BALANCE → SSV → Display mode To change the indicated text in display mode, turn the tuning knob within 2 seconds. The text will change as follows: Audio main operation The tape deck (type B) employs a permalloy head which allows for improved reproduction of high frequency ranges. Noise is also greatly reduced by the combined use of the Dolby NR (Noise Reduction) system. The auto loudness circuit enhances the low frequency range automatically in both radio reception and tape and CD playback. ON⋅OFF/Volume control: Turn the ignition switch to ACC or ON, and then push the ON⋅OFF/Volume control knob while the system is off to call up the mode (radio, tape or CD) which was playing immediately before the system was turned off. When no CD or tape is loaded, the radio will come on. While the 4-28 Display screen, heater, air conditioner and audio systems