2005 Nissan Murano Owner's Manual - Page 213

may feel a braking effect. This is a normal condition of the AWD model. If any malfunction occurs in the AWD system when the ignition switch is ON, the warning light will remain illuminated. High-temperature power-train oil due to continuous operation of the vehicle to free a stuck vehicle makes the warning light blink rapidly (about twice per second). The driving mode may change to 2 wheel drive condition. AUTO mode may change to LOCK mode before the warning light blinks. This is normal. If the warning light blinks rapidly during operation, stop the vehicle with the engine idling in a safe place immediately. Then if the light goes off after a while, you can continue driving. A large difference between the diameters of front and rear wheels will make the warning light blink slowly (about once per two seconds). Pull off the road in a safe area, and idle the engine. Check that all tire sizes are the same, tire pressure is correct and tires are not worn. SSD0314A WARNING Do not attempt to test an AWD equipped vehicle with two wheels on a two wheel dynamometer and the other two wheels raised. Doing so may result AWD WARNING LIGHT The AWD warning light is located in the meter. The AWD warning light comes on when the ignition switch is turned to ON. It turns off soon after the engine is started. 5-26 Starting and driving