2011 Suzuki Grand Vitara Owner's Manual - Page 127

OPERATING YOUR VEHICLE Cruise Control (if equipped) To Set Cruising Speed WARNING To help avoid loss of vehicle control, do not use the cruise control system when driving in heavy traffic, on slippery or winding roads, or on steep downgrades. 1) Turn on the cruise control system by pushing the "ON/OFF" switch (1). When the "CRUISE" indicator light comes on, you can set cruising speed. 2) Accelerate or decelerate to the desired speed. 3) Push the "SET/COAST" switch (3) and turn on the "SET" indicator light. Take your foot off the accelerator pedal and the set speed will be maintained. WARNING (2) 79K032 (4) (1) (3) The cruise control system allows you to maintain a steady speed without keeping your foot on the accelerator pedal. The controls for operating the cruise control system are on the steering wheel. You can use the cruise control system with the following conditions: • For manual transmission vehicle, the gear position is in 4th or 5th. • For 4-Speed automatic transmission vehicle, the gearshift lever is in "D" or "3" position. • For 5-Speed automatic transmission vehicle, the gearshift lever is in "D" or "4" position. • The vehicle speed is between approximately 45 km/h (28 mph) or higher. (1) (2) (3) (4) If the cruising speed is set by accident, you cannot decelerate or could loose control of the vehicle. This could lead to an accident, resulting in severe injury or death. Turn off the cruise control system and make sure the "CRUISE" indicator light is off when the system is not in use. NOTE: If the transfer switch (if equipped) is in the "4L LOCK" position, you cannot use the cruise control system. Refer to "Using the Transfer Switch (if equipped)" in this section. 79K049 "ON/OFF" switch "CANCEL" switch "SET/COAST" switch "RES/ACC" switch 3-26 79K21-03E