2011 Suzuki Grand Vitara Owner's Manual - Page 28
2011 Suzuki Grand Vitara Manual
Page 28 highlights
Door Locks: 3, 5, 8 BEFORE DRIVING 7) To complete programming, remove the key from the ignition switch or turn the ignition switch to the "ON" position. 8) Make sure that the keyless start system and keyless entry system operate properly by operating each remote controller. If you cannot operate the keyless start system and/or keyless entry system, repeat this programming procedure again. If you still cannot operate the systems, see your SUZUKI dealer. To change the old remote controller codes in your vehicle's memory If you have lost one of the remote controllers, you should change the remote controller codes in your vehicle's memory as soon as possible for security. To erase the remote controller code(s) in your vehicle's memory, you should program the new remote controller code. The old codes in your vehicle's memory will be erased automatically. If you have more remote controller(s), you must program all of the remote controller codes at the same time. You cannot operate the keyless start system and keyless entry system using any remote controller that is not programmed at the same time. For details on how to program, refer to the programming procedure in this section. When you complete programming, make sure that the keyless start system and keyless entry system operate properly by operating each remote controller. 1. For USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. For Canada This device complies with Industry Canada Standard RSS-210. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met. Keyless Entry System Transmitter (Type B) (1) (2) (3) 52D209 (1) "LOCK" button (2) "UNLOCK" button (3) "PANIC" button "LOCK" button (1) / "UNLOCK" button (2) function You can lock or unlock all doors (including the tailgate) simultaneously by operating the transmitter near the vehicle. • To lock the doors, push the "LOCK" button (1). • To unlock the driver's door, push the "UNLOCK" button (2) once. • To unlock other doors, wait a second or two, then push the "UNLOCK" button (2) a second time. If you "double-click" too fast, the doors will not unlock. 2-11 79K21-03E