2011 Suzuki Grand Vitara Owner's Manual - Page 87

BEFORE DRIVING Average speed If you selected average speed the last time you drove the vehicle, the display indicates the last value of average speed from previous driving when the ignition switch is turned to the "ON" position. Unless you reset the value of average speed, the display indicates the value of average speed which includes average speed during previous driving. To reset the value of average speed, push and hold the MODE/ILL knob (2) for about 2 seconds when the display indicates an average speed. The display shows "---" and then indicates a new average speed after driving for a short time. NOTE: When you reconnect the negative (-) terminal to the battery, the value of average speed will be shown after driving for a while. Odometer/Trip meter/Thermometer When the ignition switch is turned to the "ON" position, the display (C) shows one of the following three indications, trip meter A, trip meter B and thermometer. Also, the display (D) shows the odometer reading. Odometer The odometer records the total distance the vehicle has been driven. CAUTION Keep track of your odometer reading and check the maintenance schedule regularly for required services. Increased wear or damage to certain parts can result from failure to perform required services at the proper mileage intervals. Trip meter The trip meter can be used to measure the distance traveled on short trips or between fuel stops. You can use the trip meter A or trip meter B independently. EXAMPLE (f) (i) (g) (h) 79K122 (f) (g) (h) (i) Trip meter A Trip meter B Thermometer Odometer To reset the trip meter to zero, push and hold the TRIP knob (1) for about 2 seconds when the display shows the trip meter. To switch the display indication (C), push the TRIP knob (1) quickly. 2-70 79K21-03E