2011 Suzuki Grand Vitara Owner's Manual - Page 194

OTHER CONTROLS AND EQUIPMENT Selecting the reception band Press the band switch button (1). Each time the button is pressed, the reception band is switched as follows: Preset memory 1) Select the desired station. 2) Select the preset button (5) to which you want to store the station and press and hold the button for 2 seconds or longer. Auto store Press and hold the auto store button (6) for 2 seconds or longer. Six stations in total are automatically stored to the preset buttons (5) in sequential order, starting from the lower frequencies. NOTE: • When the auto store is performed, the station previously stored in the memory at the position is overwritten. • When there are fewer than 6 stations that can be stored even if 2 rounds of auto store operation are performed, the stations previously stored at the remaining preset buttons (5) are not overwritten. Scan tuning 1) Press the scan button (6). Stations are automatically sought for in a sequential order, starting from a station being currently received, and scan stops for 5 seconds at a frequency where there is a station available. 2) Press the scan button (6) again to stop scanning at the frequency being currently received. Receiving a stereo broadcast station If a stereo broadcast station is received, the stereo indicator will light. 66J098 Seek tuning Press the seek up button (2) or the seek down button (3). The unit stops searching for a station at a frequency where a broadcast station is available. Manual tuning Turn the manual tuning knob (4). The frequency being received is displayed. 5-41 79K21-03E