3Com 3CRWE554G72 User Guide - Page 45
DHCP Clients List, Unit Configuration, IP Address, Subnet Mask, Enable, Auto Range, Apply
UPC - 662705468846
View all 3Com 3CRWE554G72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
LAN Settings 45 The LAN Settings screen is used to specify the LAN IP address of your Gateway, and to configure the DHCP server. 1 Select Unit Configuration and then specify the Gateway IP Address and Subnet Mask in the LAN Settings field. The default IP address of the Gateway is 192.168.1.1. 2 If you want to use the Gateway as a DHCP Server, click in the Enable check box. 3 Clicking Auto Range will automatically choose the largest available range of addresses for your network. 4 Check all of your settings, and then click Apply. The DHCP server will give out addresses to both wired and wireless clients. DHCP Clients List Figure 31 DHCP Clients List Screen The DHCP Clients List provides details on the devices that have received IP addresses from the Gateway. The list is only created when the Gateway is set up as a DHCP server. For each device that is connected to the LAN the following information is displayed: ■ IP address - The Internet Protocol (IP) address issued to the client machine. ■ Host Name - The client machine's host name, if configured. ■ MAC Address - The Media Access Control (MAC) address of the