3Com 3CRWE554G72 User Guide - Page 60
Dynamic IP Address, If this mode is selected, your IP Address, Subnet Mask, and DNS Address
UPC - 662705468846
View all 3Com 3CRWE554G72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
60 CHAPTER 5: GATEWAY CONFIGURATION Dynamic IP Address Figure 42 Connection Parameters Screen - Dynamic IP If this mode is selected, your IP Address, Subnet Mask, and DNS Address will be obtained automatically from your ISP. They are not displayed on this screen, but may be viewed on the Status screen (click on Status and Logs on the left hand menu bar). To setup the Gateway for use with a dynamic IP address connection: 1 Select Dynamic IP Address (automatically allocated) in the IP Allocation Mode field. (Figure 42) 2 Enter your Primary DNS Address and Secondary DNS address. Your ISP may provide you with primary and secondary DNS addresses. If they have been provided, enter the addresses in the appropriate text boxes. If not, leave 0.0.0.0 in the boxes. 3 Enter the Host Name (optional). Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box. 4 If you use 'Cable', your ISP may use your MAC address to authenticate you. If this is the case, you will need to 'Clone' your MAC address. There are three options: ■ Use the Gateway's original Internet MAC address - This field is selected by default and is automatically filled in with the MAC address of the Gateway.