3Com 3CRWE554G72 User Guide - Page 62
PPPoE Service Name, Maximum Idle Time
UPC - 662705468846
View all 3Com 3CRWE554G72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
62 CHAPTER 5: GATEWAY CONFIGURATION 6 Enter your PPP over Ethernet service name in the PPPoE Service Name text box. Not all ISPs require a PPPoE service name. Only enter a service name if your ISP requires this. 7 Select an idle time from the Maximum Idle Time drop-down list. This value will correspond to the amount of idle time (no Internet activity) that will pass before the Gateway automatically ends your PPP over Ethernet session. Since the Gateway contains its own PPPoE client, you no longer need to run PPPoE client software on your computer to access the Internet. PPTP Figure 44 PPTP Setup Screen To setup the Gateway for use with a PPTP connection, use the following procedure: 1 Select PPTP (used by some European providers) in the IP Allocation Mode field. (Figure 44) 2 Enter your PPTP server address in the PPTP Server Address text box (this is typically the address of your modem). 3 Enter your PPTP user name in the PPTP User Name text box. 4 Enter your password in the PPTP Password text box.