AIWA CX-NA71 Operating Instructions - Page 15
Continuous
View all AIWA CX-NA71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
MUSIC SENSOR If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily. Press the < or - button during playback referring to the playback side indicator (+ or *) on the display. For example, when the - button is pressed while F is displayed, playback of the next track starts. Music sensor function may not be able to detect tracks under the following conditions: q Blanks of less than 4 seconds between tracks q Noisy blanks q Long passages of low-end sound c Low overall recording levels CONTINUOUS PLAY About cassette tapes q To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. \ Type II tape detection >ti slot / Tab for side A To record on the tape again, cover the tab openings with adhesive tape, etc. (On l-ype 11tapes, take care not to cover the Type II tape detection slot.) q 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recol'nmended. q Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break cx jam in the mechanism. After playback on one deck finishes, the tape in'the other deck will start to play without interruption. 1 Insert tapes into deck 1 and deck 2. 2 Press the TAPE/DECKl/2 button to select the deck to be played back first. 3 Press the REV MODE button to select 1]. 4 Press the 4 F button to start playback. Playback continues until the s button is pressed. DOLBY NR system The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system. .> ENGLISH 14