AIWA CX-NA71 Operating Instructions - Page 9

GRAPHIC EQUALIZER DSP SURROUND SYSTEIM GEQ This unit provides the following three different equalization curves. ROCK: Powerful sound emphasizing treble and bass POP: More presence in the vocals and midrange CLASSIC: Enriched sound with heavy bass and fine treble Press the GEQ button repeatedly equalization curve is displayed. ROCK /POP / CLASSIC until the desired The DSP (Digital Signal Processor) surround system can recreate the effect of sounds reflected from walls or ceilllngs. This system enhances 3 types of sound presence. DISCO: Sound presence of a disco LIVE: Sound presence of a live music performance HALL: Sound presence of a concert hall Press the SURROUND button repeatedly until the desired SURROUND mode is displayed. DISCO / LIVE/ HALL To cancel the selected mode Press the GEQ button repeatedly so that GEQ OFF appears on the display. Equalization curves are selected automatically to match the SURROUND modes and can also be selected or turned off to suit your preference. When the music source is monaural Select LIVE to obtain a simulated stereo effect. When DISCO or HALL is selected, no sound will be Iheard from the surround speakers. To cancel the selected mode Press the SURROUND button repeatedly so that SUR OFF appears on the display. While SURROLJND mode is off, no sound is heard from the surround speakers. When the MIC or ECHO level is changecl (page 19), the SURROUND mode is automatically canceled, Using the headphones Connect headphones to the PHONES jack with a stereo standard plug (06.3 mm, '/4 inch). No sound is output from the speakers while the headphones are plugged in, Sound adjustment during recording The output volume and tone (except BBE) of the speakers or headphones may be freely varied without affecting the level of the recording. m When playing back a tape recorded with BBE, it is recommended that BBE be set to off to avoid distorted high frequency sound. ENGLISH 8