Aastra OpenCom X320 User Guide - Page 167
Setting up NET CAPI, Installing the NET CAPI driver
View all Aastra OpenCom X320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Configuring the PC Software Setting up NET CAPI the item Options from the Edit menu. In the Lines tab you then select the system telephone from the Phone calls list. 3. Enter a telephone number in the Number box and confirm with Dial. Under Windows 2000/XP you first click on the Dial icon and in the subsequent dialogue activate Phone call. 4. The number you entered is displayed on the selected system telephone. Lift the receiver to start dialling. Note: This note is not relevant to Windows 2000/XP. If the "Phone Dialer" program is not installed, you will have to install it. To do this, you open the Control Panel and click on Software. In the Windows Setup tab you activate the Connections component. 14.3 Setting up NET CAPI With a CAPI driver (common application programming interface) Windows programmes are able to access services and functions of an ISDN card. With a network-based CAPI, the OpenCom X320 allows the use of ISDN functions also by PCs in which no ISDN card is integrated. Requirements You require an active IP network connection between the PC and the telephone system. Please note: Before installing the CAPI driver for the OpenCom X320, any existent ISDN card must be removed and any CAPI drivers on your PC must be de-installed. Installing the NET CAPI driver 1. Call up the start mask from the product CD (see Configuring the PC Software on page 161). 2. Select Software: NET CAPI Driver from the start mask and follow the program instructions. 165