Acer Altos 1100e Acer Altos 1100e User's Guide - Page 106
PCI IRQ Setting, PCI Slots, Onboard LAN
View all Acer Altos 1100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
PCI IRQ Setting This parameter allows for Auto or Manual configuration of PCI devices. If you use plug-and-play (PnP) devices, set this parameter to Auto. The system then automatically assigns IRQs to PnP devices. If your PCI device is not a PnP, you can manually assign the interrupt for each device. Refer to your PCI card manual for more information. The default setting is Auto. When the PCI IRQ Setting is set to Auto, all the IRQ setting fields become gray and nonconfigurable. PCI Slots These parameters allow you to specify the appropriate interrupt for each of the PCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, IRQ12, IRQ14, or IRQ15 to the slots. Make sure that the interrupt you assign to the various PCI slots are not used by other devices to avoid conflicts. Press or to move between fields. Press or to select options. AGP This item shows the assigned interrupt for the onboard accelerated graphics port (AGP) controller. Onboard LAN This item allows you to manually assign the interrupt for the onboard LAN when the PCI IRQ Setting parameter is set to Manual. This parameter is grayed and not user-configurable when the PCI IRQ Setting is set to Auto. 3-30 Altos 1100E Series User's Guide