Acer Altos 1100e Acer Altos 1100e User's Guide - Page 132
Host Adapter SCSI ID
View all Acer Altos 1100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Adaptec AHA-3950U2B SCSISelect (TM) Utility AHA-3950U2B at Bus:Device 00:00h Configuration SCSI Bus Interface Definitions Host Adapter SCSI ID 7 SCSI Parity Checking Enabled Host Adapter SCSI Termination Automatic Additional Options Boot Device Options Press SCSI Device Configuration Press Advanced Configuration Options Press - Reset to Host Adapter Defaults * Arrow keys to move cursor, to select option, to exit ( =default) Figure 4-3 Configure/View Host Adapter Settings Screen (2 of 2) Use the cursor (↑ ↓) to move to your selection. Press Enter to display a pop-up menu of choices or to make selections. Press Esc at any time to return to the previous menu. Press F6 to reset all settings to the SCSI controller defaults. SCSI controller default settings are marked with an asterisk (*) throughout the selection submenus. Host Adapter SCSI ID This option allows you to change the host controller SCSI ID. The figure below shows the available IDs for use with the AHA-3950U2B. The default setting is SCSI ID 7. (We recommend that you not change this setting.) Some operating system software will not run unless the SCSI controller ID is set at ID 7. Altos 1100E Series User's Guide