Acer Altos 1100e Acer Altos 1100e User's Guide - Page 128
Table 4-1, Default Settings for SCSI Controller and All Devices, Default Value
![]() |
View all Acer Altos 1100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Table 4-1 Default Settings for SCSI Controller and All Devices Global Settings for SCSI Controller and All Devices Host Adapter SCSI ID SCSI Parity Checking Host Adapter SCSI Termination Boot Channel/ Boot SCSI I/O Host Adapter BIOS1 Support Removable Disks Under BIOS as Fixed Disks Extended BIOS Translation for DOS Drives > 1 Gbyte Display Message During BIOS Initialization BIOS Support for Bootable CD-ROM BIOS Support for Int13 Extensions Individual Settings for Each SCSI Device Initiate Wide Negotiation Maximum Sync Transfer Rate Enable Disconnection Send Start Unit Command1 Initiate Wide Negotiation 1 Settings are valid only if host adapter BIOS is enabled. 2 Do not change this setting from the default. Default Value 7 Enabled Automatic A/0 (zero) Enabled Boot only Enabled2 Enabled Enabled Enabled Default Value Yes 80 MBytes/sec. Yes Yes Yes Altos 1100E Series User's Guide
![](/manual_guide/products/acer-computers-altos-1100e-acer-altos-1100e-users-guide-0926de1/128.png)