Acer Altos 1100e Acer Altos 1100e User's Guide - Page 140
Enable Disconnection, Initiate Wide Negotiation, Disconnect/Reconnect.
View all Acer Altos 1100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Enable Disconnection This option determines whether the SCSI controller allows a SCSI device to disconnect from the SCSI bus (sometimes called Disconnect/Reconnect). Disconnect/Reconnect allows the SCSI controller to perform other operations on the SCSI bus while the SCSI device is temporarily disconnected. When set to yes, the SCSI device may disconnect from the SCSI bus. The SCSI device, however, may choose not to disconnect, even if permitted by the SCSI controller (this can usually be configured on the SCSI device). When set to no, the SCSI device is not allowed to disconnect from the SCSI bus. The default setting is yes. You should leave Enable Disconnection set to yes if two or more SCSI devices are connected to the SCSI controller. This optimizes SCSI bus performance. If only one SCSI device is connected to the SCSI controller, set Enable Disconnection to no to achieve slightly better performance. Initiate Wide Negotiation This option allows communication between all devices (lower 8-bit or upper 8-bit) on the wide (16-bit) SCSI bus. When set to yes, each device can connect on the bus. When set to no (disabled), communication can only occur on the lower 8-bits of the 16-bit SCSI bus. The default setting is yes. Altos 1100E Series User's Guide