Acer Altos 1100e Acer Altos 1100e User's Guide - Page 99
Serial Port 1, The Base Address
View all Acer Altos 1100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
The following screen shows page 2 of the Onboard Devices Configuration menu: Onboard Devices Configuration Page 2/2 Onboard Floppy Disk Controller ...... [Enabled] Onboard IDE Primary Channel ......... [Enabled] Onboard IDE Secondary Channel ....... [Disabled] Onboard PS/2 Mouse (IRQ 12 Enabled] Onboard USB Disabled] USB Legacy Mode Onboard Ethernet Chip Enabled] SMBUS Interrupt(IRQ9 Disabled] ↑↓ = Move Highlight Bar, → ← = Change Setting, F1 = Help PgDn/PgUp = Move Screen Serial Port 1 This parameter allows you to enable or disable the serial port 1. The Base Address and IRQ items are configurable only if this parameter is enabled. The default setting is Enabled. Chapter 3 - BIOS Utility 3-23
Chapter 3 - BIOS Utility
3-23
The following screen shows page 2 of the Onboard Devices Configuration menu:
Onboard Devices Configuration
Page 2/2
Onboard Floppy Disk Controller
......
[Enabled]
Onboard IDE Primary Channel
.........
[Enabled]
Onboard IDE Secondary Channel
.......
[Disabled]
Onboard PS/2 Mouse (IRQ 12)
.........
[Enabled]
Onboard USB
.........................
[Disabled]
USB Legacy Mode
..................
[--------]
Onboard Ethernet Chip
...............
[Enabled]
SMBUS Interrupt(IRQ9)
...............
[Disabled]
↑↓
= Move Highlight Bar,
→
←
= Change Setting, F1 = Help
PgDn/PgUp = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1.
The Base Address
and IRQ items are configurable only if this parameter is enabled.
The default
setting is
Enabled
.