Acer Altos 1100e Acer Altos 1100e User's Guide - Page 74
Table 2-4, System Error Messages continued
![]() |
View all Acer Altos 1100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Table 2-4 System Error Messages (continued) Message Memory Error at: MMMM:SSSS:OOO (W:XXXX, R:YYYY) where: M: MB, S: Segment, O: Offset, X/Y: write/read pattern Memory Size Mismatch CPU Clock Mismatch Onboard Serial Port 1 Conflict Onboard Serial Port 2 Conflict Onboard Parallel Port Conflict Pointing Device Error Pointing Device Interface Error Press F1 key to continue or Ctrl-Alt-Esc for Setup Real Time Clock Error Press Esc to turn off NMI, any key to reboot Action Check DIMMs on the system board. Contact your dealer. Check the memory size based on the system specifications. Check the internal cable connections. If you are sure that connections and values are correct, ignore the message. If the message reappears, ask for technical assistance. Run Setup (See Section 3.1) and disable the port. Run Setup (See Section 3.1) and disable the port. Run Setup (See Section 3.1) and disable the port. Check and connect pointing device. Replace the pointing device or contact your dealer. Press or + + Setup. to enter Run Setup (See Section 3.1) and set the time and date. Press error. to disregard the NMI Press any other key to reboot the system. 2-28 Altos 1100E Series User's Guide
![](/manual_guide/products/acer-computers-altos-1100e-acer-altos-1100e-users-guide-0926de1/74.png)