Acer Aspire G7710 Aspire G7710 Series User's Guide - EN - Page 73

Observe the post-installation instructions described - bios

Get Acer Aspire G7710 PDF manuals and user guides View all Acer Aspire G7710 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

English 61 5 Align the DIMM so that the notch on the slot fits the keyed edge of the module, then press the module at both ends to seat it fully into the slot (1). If you insert a DIMM but it does not fit easily into the slot, you have inserted it incorrectly. Reverse the orientation of the module and insert it again. 6 Firmly press the holding clips inward to lock the DIMM in place (2). If the holding clips do not close, the DIMM is not properly inserted. 7 Observe the post-installation instructions described on page 49. The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value for total system memory and make a note of it.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
61
English
5
Align the DIMM so that the notch on the slot fits the keyed edge of the
module, then press the module at both ends to seat it fully into the slot
(1)
.
If you insert a DIMM but it does not fit easily into the slot, you have
inserted it incorrectly. Reverse the orientation of the module and insert it
again.
6
Firmly press the holding clips inward to lock the DIMM in place
(2)
.
If the holding clips do not close, the DIMM is not properly inserted.
7
Observe the post-installation instructions described on page 49.
The system automatically detects the amount of memory installed. Run the
BIOS setup to view the new value for total system memory and make a
note of it.