Acer G330 Altos G330 User's Guide - Page 116
Creating the RAID 1 volume, Initializing the RAID volume
UPC - 750519177044
View all Acer G330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
106 Appendix B: SATA RAID configuration Creating the RAID 1 volume 1 In the onboard LSI RAID Configuration Utility, select Configuration from the Management menu. 2 Select New Configuration from the Configuration menu, then select YES to continue. An array selection window displays the devices connected to the current controller. 3 Press the arrow keys to choose the specific physical drives, then press the space bar to associate the selected drive with the current array. The indicator for the selected drive change from READY to ONLINE. 4 Add two more drives to the current array, then press Enter. 5 Press Enter again to select another array to configure. 6 Press the space bar to select the array, then press F10 to configure the logical drive. 7 Accept the default RAID level (RAID1), then press Enter to return to the array selection window. 8 Press Enter to end the array configuration. 9 Select YES to save the configuration, then press any key to return to the Configuration menu. Initializing the RAID volume 1 Press Esc to return to the Management menu. 2 Select Initialize from the Management menu. All logical drives should be listed under Logical Drives. 3 Press the space bar to select the drives for initialization. The selected drive will be shown in yellow. 4 Press F10, then select YES to start the initialization process. 5 Once initialization is complete, press any key to continue. 6 Press Esc to return to the Management menu. 7 Press Esc, then select YES to close the configuration utility. 8 Press Ctrl+Alt+Del to reboot the system, then proceed to the OS installation.