Acer G330 Altos G330 User's Guide - Page 42
To remove an easy-swap hard drive, HDD configuration also supports SATA HDDs connected to - raid
UPC - 750519177044
View all Acer G330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
32 3 System upgrade To remove an easy-swap hard drive: 1 Remove the side panel from the chassis. Go to page 27 for instructions. 2 Disconnect the data and power cables from their HDD connectors. The figure below shows the cable connections for a SAS HDD connected to an optional SAS/SAS RAID expansion card. Easy-swap HDD configuration also supports SATA HDDs connected to the onboard SATA connectors. 3 Press the hard disk carrier button to release the ejector lever. 4 Use the ejector lever to pull the drive out of the cage. Make sure to support the drive when pulling it out of the cage. 5 Observe the post-installation instructions described on page 26.
3 System upgrade
32
To remove an easy-swap hard drive:
1
Remove the side panel from the chassis.
Go to page 27 for instructions.
2
Disconnect the data and power cables from their HDD connectors.
The figure below shows the cable connections for a SAS HDD
connected to an optional SAS/SAS RAID expansion card.
Easy-swap
HDD configuration also supports SATA HDDs connected to the
onboard SATA connectors.
3
Press the hard disk carrier button to release the ejector lever.
4
Use the ejector lever to pull the drive out of the cage.
Make sure to support the drive when pulling it out of the cage.
5
Observe the post-installation instructions described on page 26.