Adaptec 5325302053 User Guide - Page 129

Disk Drive LEDs Disk drive LEDs on the Snap Server 700i Series are located beneath the status lights on the bezel. For all disk drive LEDs, the left light indicates drive status; the right light indicates drive activity. They operate as follows: Status LED (left) Activity LED (right) Solid green Solid green Solid amber Off Blinking green Off Off Off Disk drive installed properly but is not active Disk drive installed properly and is active Disk drive installed, but not working correctly No disk drive installed Note You can blink a disk drive from Adaptec Storage Manager by right-clicking the drive and selecting Blink disk drive. See "Blinking Appliances, Enclosures, and Disk Drives" on page 109 for instructions. Power Supply Module Indicator Lights The LED on a 700i Series power module is identified in the following illustration. Status LED Power Solid green Blinking green Solid amber Off Description The module is operating properly. The module has failed or is not connected. The module has failed, is not connected, or the server has been turned off.