Adaptec 5325302053 User Guide - Page 180
For iSCSI portal, uncomment the Discovery address parameter and enter the IP, CHAP login
UPC - 753253020539
View all Adaptec 5325302053 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
2 Verify if inbox Cisco-initiator is installed on a RHEL 4 setup, using one of these commands: • rpm -qf /sbin/iscsid • rpm -qa | grep iscsi-initiator-utils If the Cisco initiator is installed, the utility is displayed in the output. 3 Set the Cisco initiator as the default initiator. The default initiator can be modified in initiatorname.iscsi in /etc directory. For example, the default initiator name can be set as iqn.1987-05.com.cisco:rhel4. 4 Set the target portal address, target name and the authentication details for CHAP login, in the iscsi.conf file present in /etc directory. • For iSCSI portal, uncomment the Discovery address parameter and enter the IP address. Discovery Address Category To localize parameters to targets found on a particular discovery address # (i.e., to override the global settings), you need to use the # "DiscoveryAddress" setting. The format for the "DiscoveryAddress" setting is # a.b.c.d, a.b.c.d:e (where e is a TCP port number), or an instance name. An # example of these settings would be: # DiscoveryAddress=10.161.205.92 • For target name, uncomment TargetName parameter and enter the name of the target as listed in CLI. Note The target name should be modified only for using a particular target. Discovery Address Category To localize parameters to targets found on a particular discovery address Target Name Category To localize parameters to targets identified by a particular target name # (i.e., to override the global settings), you need to use the # "TargetName" setting. The format for the "TargetName" setting is