Adaptec 5325302053 User Guide - Page 204

Snap Server and Expansion Array Hardware Specifications This section provides hardware specifications for the Snap Server 700i Series and SANbloc S50 expansion arrays. Specifications are subject to change without notice; for updates to and further information on the specifications, see http://www.snapserver.com. Caution Use only qualified components purchased from an authorized Adaptec reseller to service Snap Server storage products. Qualified means that Adaptec technicians have tested and verified that the component operates properly with the Snap Server and other network components. Failure to use qualified components may seriously impact data availability, potentially lead to data loss and corruption, and will void your warranty. Snap Server 700i Series Specifications Feature Network Connection Dimensions Power Operating Environment Nonoperating Environment Regulatory Certifications Specification Autosensing 10/100/1000Base-T, dual RJ-45 network connectors, with support for load-balancing and failover. Width 17.5 in (444.5 mm) Depth 28.07 in (713 mm) Height 1.75 in (44.45 mm), 1U Weight 40 lbs (18.5 kg) Power Rating: 400W, 100-240 VAC, 50-60Hz, Input Current: 3.4A (RMS) for 115VAC, 2.3A (RMS) for 230VAC Power Consumption: 290W (steady state), 360W (maximum) Heat Dissipation: 990 BTUs/hr 50° F to 95° F (10° C to 35° C) 20% to 80% humidity (noncondensing) Vibration: .10G at 10-300Hz Random for 120 min. max duration Shock: 6 pulses of 33G for up to 2ms Altitude: 0 ft. to 10,000 ft. (0m to 3,048m) 14° F to 149° F (-10° C to 65° C) 5% to 95% humidity (noncondensing) Vibration: 2G at 5-500Hz for 90 min. max duration Altitude: 0 ft. to 35,000 ft. (0m to 10,668m) UL, cUL, CE, FCC Class A, TuV, NEMKO, CTick