Adaptec 5325302053 User Guide - Page 51

11 Create a discovery Control List. (A discovery control list allows one or more specified iSCSI initiators to discover an iSCSI target while preventing other iSCSI initiators from discovering it. See page 83 for more information.) a Click Add Initiator. The Add iSCSI Initiator window opens. b Enter the IQN (iSCSI Qualified Name) assigned to the iSCSI initiator. c Enter a name (or alias) for the initiator. The name must begin with a alphabetic character, and can contain only letters and numbers. d (Optional-VMware ESX users only) Click Advanced options, then enable Uses permanent discovery session. e (Optional-Advanced users only) Click Advanced settings to enable or disable Protocol Data Unit, iSCSI ping, and discovery settings. Note Refer to your iSCSI initiator's documentation for more information about the advanced settings. f Click OK. Note The iSCSI initiator appears in the Initiators drop-down menu. g Repeat Steps a to f to add more initiators, if required. h From the Initiators drop-down menu, select the initiator you want. i From the list of logical devices, select the logical device(s) that you want the selected initiator to discover, then click the right arrow (>). j Repeat Steps h and i for each iSCSI initiator. Note Each logical device can support up to 32 iSCSI initiators. For more information about auto-discovery control lists, see page 83. k Click Next, review the configuration summary, click Apply, then click Yes.