Adaptec 5325302053 User Guide - Page 169
Configuring iSCSI Initiators, Configuring iSNS with the CLI
![]() |
UPC - 753253020539
View all Adaptec 5325302053 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Appendix A Configuring iSCSI Initiators Use the information in this appendix in conjunction with the documentation supplied with your initiator to configure the iSCSI initiators that connect to the iSCSI targets on your iSCSI Storage Appliance. Configuring iSNS with the CLI You can use Microsoft iSNS Server to discover targets on an iSCSI network. To download the iSNS package, go to the Microsoft web site and search for isns. The package installs a readme file that contains extensive release notes on bug fixes and current iSNS limitations. Be sure to read these notes before attempting to use the service. Note When you use iSNS, all iSCSI initiators and users can connect to any iSCSI targets-no restrictions are enforced. 1 Install the iSNS service on a Windows server. Note the IP address of the server on which the iSNS service is installed. 2 Open the CLI on the iSCSI Storage Appliance. You can access the CLI two ways. Each method presents the CLI automatically: • Attach a VT100 terminal emulation utility (for example, hyperterminal) to the serial port of the iSCSI Storage Appliance. Use these terminal emulation program settings to access the CLI: • Null Modem Cable • Baud Rate: 115,200 • Data Bits: 8 • Parity: None • Stop Bits: 1 • Flow Control: Off Note Flow control must be set to Off. Otherwise, the system will appear to hang. • Connect to the iSCSI Storage Appliance through a Telnet session (once the initial network values have been set). Telnet to the IP address that is assigned to the management port on the iSCSI Storage Appliance.
![](/manual_guide/products/adaptec-5325302053-user-guide-2ee3163/169.png)