Adaptec 5325302053 User Guide - Page 196

Product Descriptions The Snap Server 700i Series provides a cost-effective, low-maintenance network block iSCSI solution that supports simultaneous access by Windows and Linux hosts. All Adaptec OnTarget-powered Snap Servers come with three or four Gigabit Ethernet (GbE) ports, dual processors, and a SAS card for connecting to a SANbloc S50 expansion array. Model Snap Server 700i Series SANbloc S50 Description The Snap Server 720i, 730i, and 750i are 1U iSCSI Storage Appliances with: • 4 redundant, hot-swappable SATA disk drives (720i and 730i only). • 4 redundant, hot-swappable SAS disk drives (750i) • Dual power supplies (730i and 750i) • Expandable by attaching multiple SANbloc S50 expansion arrays. The SANbloc S50 is a 2U expansion array with 12 hot-swappable SAS or SATA disk drives that adds capacity to the Snap Server 700i Series. All rack-mountable Snap Servers and expansion arrays come with the cables and hardware required to install them into a rack and connect them to the network or other Snap Server storage products. Customers supply the rack, Ethernet switches, and UPS devices. The capacity of the Snap Server can be enhanced by attaching one or more SANbloc S50 expansion arrays. If your SANbloc S50 expansion array came with less than the maximum number of drives, it can be upgraded to increase available capacity. • Use only internal hardware components qualified by Adaptec - Adaptec strongly recommends that you use only qualified components from authorized Adaptec resellers. Qualified means that Adaptec technicians have tested and verified that the component operates properly with the Snap Server 700i Series and other network components. Failure to use qualified components may seriously impact data availability, could potentially lead to data loss and corruption, and will void your warranty.