Alcatel OS6400-48 Hardware User Guide - Page 106
Using Switch Uptime, Primary Management Module Selection Using Switch Uptime
View all Alcatel OS6400-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Roles Within the Stack Managing OmniSwitch 6400 Series Stacks Using Switch Uptime A user can override both the MAC address and saved slot methods for determining a stack's primary management module. This is done by controlling the uptime of switches in the stack. If all elements of a stack are powered off, the user can force a particular switch to become primary by powering on that switch and waiting a minimum of 15 seconds before powering on any other switches. This can be useful if the user wants a switch placed in a specific location, e.g., the top-most switch in a stack, to become the primary. As with the lowest MAC address method, the primary management module is dynamically assigned slot number 1 when the stack is booted. For more information on using saved slot information to determine the primary switch in a stack, refer to the diagram below: Off Off Off Powered On 1 Four OmniSwitch 6400 Series switches are stacked and connected via stacking cables. All switches are currently powered off. The user powers on a single switch in the stack. In this case, the bottom-most switch is powered on. Off Off Off Primary (Saved Slot 8) Powered On Powered On Powered On Primary (Saved Slot 8) Saved Slot 3 Saved Slot 1 Saved Slot 2 Primary (Saved Slot 8) 2 The user allows a minimum of 15 seconds to pass. Because no other switches have joined the stack, the switch that was powered on considers itself a stand-alone. The switch assumes a primary role by default-even if there is a high saved slot number in its boot.slot.cfg file (e.g., 8). 3 The user now powers on the remaining switches in the stack in short succession. 4 In this example, when the remaining switches come online, each has a lower saved slot value than the switch powered on at step 1. However, the switch powered on at step 1-with its slot value of 8-retains its primary management role. The joining switches are essentially ineligible for primary status because they are considered "late arrivals." For the primary switch to forfeit its role to the switch with the lowest assigned slot number (in this case, slot number 1), the stack must be rebooted by the user either by issuing the reload all command or by powering off and powering on all switches in close succession. Primary Management Module Selection Using Switch Uptime page 6-8 OmniSwitch 6400 Series Hardware Users Guide July 2010