Alcatel OS6400-48 Hardware User Guide - Page 72

Connecting the Power Supply Cable to the Chassis, Note., Attaching the Power Shelf to the Rack

Get Alcatel OS6400-48 PDF manuals and user guides View all Alcatel OS6400-48 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Rack Mounting Power Supplies Mounting OS6400 Switches Note. A single 510W power supply or up to two of any other power supply types can be attached to a power supply shelf. 4 After the rack-mount flanges and the power supply are secured to the shelf, mark the holes on the rack where the shelf is to be installed. 5 Lift and position the shelf until the rack-mount flanges are flush with the rack post. 6 Align the holes in the flanges with the rack holes that were marked earlier. 7 Once the holes are aligned, insert a rack mount screw (not provided) through the bottom hole of each flange. Tighten both screws until they are secure. Attaching the Power Shelf to the Rack Note. Be sure to install the screws in the bottom hole of each flange, as shown, before proceeding. 8 Once the screws at the bottom of each flange are secure, install the remaining two rack mount screws. Be sure that all screws are securely tightened. Connecting the Power Supply Cable to the Chassis Follow the steps below to connect a power supply with a cable: 1 Be sure the switch and power shelf are securely fastened to the rack. 2 Connect the proper end of the supplied power supply cable to the appropriately labeled primary or backup connector on the switch and tighten securely. 3 Connect the other end of the power supply cable to the power supply and securely tighten. 4 Connect the power cord to the power supply. page 3-16 OmniSwitch 6400 Series Hardware Users Guide July 2010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Rack Mounting Power Supplies
Mounting OS6400 Switches
page 3-16
OmniSwitch 6400 Series Hardware Users Guide
July 2010
Note.
A single 510W power supply or up to two of any other power supply types can be attached to a
power supply shelf.
4
After the rack-mount flanges and the power supply are secured to the shelf, mark the holes on the rack
where the shelf is to be installed.
5
Lift and position the shelf until the rack-mount flanges are flush with the rack post.
6
Align the holes in the flanges with the rack holes that were marked earlier.
7
Once the holes are aligned, insert a rack mount screw (not provided) through the
bottom hole of each
flange
. Tighten both screws until they are secure.
Attaching the Power Shelf to the Rack
Note
.
Be sure to install the screws in the
bottom hole
of each flange, as shown, before proceeding.
8
Once the screws at the bottom of each flange are secure, install the remaining two rack mount screws.
Be sure that all screws are securely tightened.
Connecting the Power Supply Cable to the Chassis
Follow the steps below to connect a power supply with a cable:
1
Be sure the switch and power shelf are securely fastened to the rack.
2
Connect the proper end of the supplied power supply cable to the appropriately labeled primary or
backup connector on the switch and tighten securely.
3
Connect the other end of the power supply cable to the power supply and securely tighten.
4
Connect the power cord to the power supply.