Alcatel OS6400-48 Hardware User Guide - Page 53
boot serialstopbits, boot.params, commit file, commit, system, Note., commit system
View all Alcatel OS6400-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
OmniSwitch 6400 Series Chassis and Hardware Components Console Port 5 To change the stop bits value, enter boot serialstopbits, followed by the number of stop bits. Options include 1 (default) and 2. For example: Boot > boot serialstopbits 2 6 Verify your current changes by entering show at the boot prompt: Boot > show Edit buffer contents: Serial (console) baud Serial (console) parity Serial (console) stopbits Serial (console) wordsize : 19200 : even : 2 : 7 (additional table output not shown) 7 You can save your changes to the boot.params file by entering commit file at the boot prompt: Boot > commit file When the commit file command is used, changes will not be enabled until after the next switch reboot. 8 You can also save your changes in real time to the switch's running memory by entering commit system at the boot prompt: Boot > commit system Note. There are two important things to consider when using the commit system command to save serial connection changes: • Output to the terminal may become illegible due to incompatible serial connection settings between the switch and the terminal emulation software. • If you use the commit system command only, changes will not be saved to the switch's boot.params file and will be lost if the switch is rebooted. To save changes to the boot.params file, refer to step 7. 9 Return to the CLI prompt by entering exit at the boot prompt. OmniSwitch 6400 Series Hardware Users Guide July 2010 page 2-33