Alcatel OS6400-48 Hardware User Guide - Page 87
Power over Ethernet Specifications
View all Alcatel OS6400-48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Managing Power over Ethernet (PoE) Power over Ethernet Specifications Power over Ethernet Specifications The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more detailed power supply and Power Source Equipment (PSE) specifications, refer to Chapter 2, "OmniSwitch 6400 Series Chassis and Hardware Components." IEEE Standards supported Default PoE administrative status Default PoE operational status OmniSwitch 6400 Series platforms supporting PoE Cable distances supported Total number of PoE-capable ports per switch Default amount of inline power available for each slot Range of inline power allowed for each slot Default amount of inline power available for each port Range of inline power allowed for each port PoE Current draw PoE Power IEEE 802.3af DTE Power via MDI Enabled Disabled (PoE must be activated on a switchby-switch basis via the lanpower start command.) OmniSwitch 6400-P24 and OmniSwitch 6400P48 100 meters (approx.) 24 or 48 390 Watts (510W power supply) 240 Watts (360W power supply) 37-390 (510W power supply) 37-240 (360W power supply) 15400 milliwatts 3000-18000 milliwatts Approximately 4.3 Amps 390 Watts (510W power supply) 240 Watts (360W power supply) OmniSwitch 6400 Series Hardware Users Guide July 2010 page 5-3