Alcatel OS6602-24 Getting Started Guide - Page 68

OmniSwitch 6600-U24 Front Panel Console Port The OS6600-U24 front panel provides one RJ45 port for console connections. Serial console connections are used by network administrators for switch management. This connector provides a DCE console connection. Gigabit Ethernet Uplink Module Slot The OS6600-U24 provides a dedicated slot for Gigabit Ethernet uplink modules. This slot supports the following module types: • OS6600-GNI-C2-Provides two fixed 1000BaseT copper connections (uses two RJ-45 connectors). Supports distances up to 100 meters. • OS6600-GNI-U2-Provides two MiniGBIC bays that support hot-swappable 1000BASE-X MiniGBIC transceivers. OmniSwitch 6600-U24 TM CONSOLE 1 3 5 7 OK1 SEL PS1 2 OK2 PS2 PRI SEC FAN TEMP 1 2 3 4 5 6 7 8 9 11 13 15 17 19 21 23 9 10 11 12 13 14 15 16 24 17 18 19 20 21 22 23 24 Status and Slot Indicator LEDs For information on the OS6600-U24's status and slot indicator LEDs, refer to page 67. Slot Selector Button The slot selector button, located directly beneath the slot indicator LED, is used to manually assign slot numbers to switches in stacked configurations. Refer to "Assigning Slot Numbers" on page 25 for detailed information. 100 Mbps Ethernet SFP Ports The OS6600-U24 provides 24 100 Mbps SFP Ethernet ports. These ports can use the SFP-100-LC-MM, SFP-100-LC-SM, and SFP-100MTRJ transceivers in any combination. EXPANSION 25 26 EXPANSION/STACKING 27 28 LINK/ACT LINK/ACT Stacking or Uplink Module Slot The OS6600-U24 provides an additional slot that can accommodate either a stacking module or a Gigabit Ethernet uplink module. If you use a Gigabit Ethernet uplink module in this slot, the OS6600-U24 must be used as a stand-alone switch. A stacking module must be installed in this slot if the switch is to be used in a stacked configuration. For information on stacking switches, refer to page 24. 62 Hardware Basics March 2005