Alpine CDE-HD137BT Owners Manual (english) - Page 19
Setting the Source Volume Level, Adjusting the High Pass Filter - microphone
View all Alpine CDE-HD137BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting the Bass Center Frequency (CENTER FRQ) Turn the Rotary encoder to select the desired bass center frequency. 60 (Hz) 80 (Hz) 100 (Hz) 120 (Hz) Emphasize the displayed bass frequency ranges. Setting the Bass Level Turn the Rotary encoder to select the desired bass level (−7 ~ +7)*. You can emphasize or weaken the bass level. * The adjustment can also be made by pressing AUDIO. Refer to "Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat" on page 16. Setting the Mid Control 1 After selecting MID from the 3BAND EQ adjustment mode, turn the Rotary encoder to select the desired item, and then press ENTER. WIDTH (Q) CENTER FRQ LEVEL 2 Turn the Rotary encoder to select the desired setting value, and then press ENTER. 3 Press to return to the previous step. Setting the Mid Bandwidth (WIDTH (Q)) Turn the Rotary encoder to select the desired Mid bandwidth. WIDE 0.75 MEDIUM 1.00 MEDIUM 1.25 NARROW 1.50 Setting the Mid Center Frequency (CENTER FRQ) Turn the Rotary encoder to select the desired Mid center frequency. 500 (Hz) 1.0 k (Hz) 1.5 k (Hz) 2.5 k (Hz) Setting the Mid Level Turn the Rotary encoder to select the desired Mid level (−7 ~ +7)*. You can emphasize or weaken the Mid level. * The adjustment can also be made by pressing AUDIO. Refer to "Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat" on page 16. Setting the Treble Control 1 After selecting TREBLE from the 3BAND EQ adjustment mode, turn the Rotary encoder to select the desired item, and then press ENTER. WIDTH (Q) CENTER FRQ LEVEL 2 Turn the Rotary encoder to select the desired setting value, and then press ENTER. 3 Press to return to the previous step. Setting the Treble Bandwidth (WIDTH (Q)) Turn the Rotary encoder to select the desired treble bandwidth. WIDE 0.75 NARROW 1.25 Setting the Treble Center Frequency (CENTER FRQ) Turn the Rotary encoder to select the desired treble center frequency. 7.5 K (Hz) 10.0 K (Hz) 12.5 K (Hz) 15.0 K (Hz) Setting the Treble Level Turn the Rotary encoder to select the desired treble level (−7 ~ +7)*. You can emphasize or weaken the treble level. * The adjustment can also be made by pressing AUDIO. Refer to "Adjusting Subwoofer Level/Bass Level/Middle Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat" on page 16. Setting the Source Volume Level The output level of each source is individually adjustable. For example, if the TUNER level sounds lower than CD, its output can be adjusted without affecting the other sources. The Hands free phone talk level, ring tone level and microphone gain level can also be adjusted by using this setting. Setting item: VOL LV ADJ Further setting items: TUNER / SIRIUSXM* / DISC / USB / iPod / BT AUDIO / BT PANDORA / AUX / PHONE TALK / RING TONE / MIC GAIN Setting contents: −5 dB ~ +5 dB * Only for CDE-HD138BT. Adjusting the High Pass Filter The High Pass Filter on this unit can be adjusted to suit your personal taste. This feature works best when used in conjunction with a subwoofer. Setting item: HPF Setting contents: HPF OFF (Initial setting) / HPF 60 (Hz) / HPF 80 (Hz) / HPF 120 (Hz) / HPF 160 (Hz) All frequencies above the selected cutoff are output. 19-EN