Alpine CDE-HD137BT Owners Manual (english) - Page 37

iPod with video: Ver.1.3 iPod nano (1st generation): Ver.1.3.1 • Confirmed devices regarding Made for iPhone. Correct function of earlier versions cannot be guaranteed. iPhone 4: Ver.4.2.1 iPhone 3GS: Ver.4.3 iPhone 3G: Ver.4.2.1 iPhone: Ver.3.1.3 • For clarity in identifying your model of iPod, please see Apple's own document "Identifying iPod models" at http://support.apple.com/kb/HT1353 • This unit does not support video playback from iPod/iPhone. Setting the iPod Control When an iPod/iPhone is connected, operate it from its own controls or from the head unit. 1 Press and hold ENTEROPTION for at least 2 seconds in the iPod mode. The Option menu for iPod mode is activated. 2 Turn the Rotary encoder to select iPod CONT, and then press ENTER. The iPod control mode will switch between iPod MODE and HU MODE. HU (HEAD UNIT) MODE: Operate the iPod/iPhone via the head unit controls. iPod MODE: Operate the iPod/iPhone using its own controls. When iPod is selected, some functions will not be operable via the head unit. Notes • Once the control mode is changed, this will set pause status, press  to continue. • Depending upon the iPod used, iPod control may not be selectable. Or, if iPod is selected, operation must still be from the head unit. Playback 1 Press SOURCE to switch to the iPod mode. 2 Press  or  to select the desired song. Pressing and holding  or  will fast backward/fast forward the current track. 3 To pause playback, press . Pressing  again will resume playback. Notes • A song playing on the iPod/iPhone while it is connected to this unit will continue to play from where it was paused after disconnection. • If you listen to an episode from a selected Podcast or Audiobook, the episode can be changed by pressing 1 or 2. • An episode may have several chapters. The chapter can be changed by pressing  or . • During iPod/iPhone playback, press  , and then you can quickly return to the hierarchy level selected last time in the search mode. Searching for a desired Song An iPod/iPhone can contain thousands of songs. The unit for this reason can make various searches using the search function as shown below. Each music category has its own individual hierarchy. Use the Playlist/ Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode to narrow searches based on the table below. Hierarchy 1 Playlist Artist* Album* Song Podcast Genre* Composer* Audiobook Hierarchy 2 Song Album* Song - Episode Artist* Album* - Hierarchy 3 - Song - - - Album* Song - Hierarchy 4 - - - - - Song - - Note • You can select your preferred search mode. Refer to "iPod/iPhone Search Mode Setting" on page 26. For example: Searching by Artist name The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs. 1 Press ENTER to activate the search selection mode. The "" indicator lights up. 2 Turn the Rotary encoder to select the ARTIST search mode, and then press ENTER. SHUFFLEALL*1  PLAYLIST  ARTIST  ALBUM  SONG  PODCAST  GENRE  COMPOSER  AUDIOBOOK  SHUFFLEALL *1 Refer to "Random Play Shuffle (M.I.X.)" on page 39. Note • The display of search mode list varies depending on the setting of iPod LIST. Refer to "iPod/iPhone Search Mode Setting" on page 26. 3 Turn the Rotary encoder to select the desired Artist, and then press ENTER. 4 Turn the Rotary encoder to select the desired Album, and then press ENTER. 5 Turn the Rotary encoder to select the desired Song, and then press ENTER. 37-EN