Alpine CDE-HD137BT Owners Manual (english) - Page 9
Getting Started - no pandora
View all Alpine CDE-HD137BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started SOURCE/ Rotary encoder/ /ENTER Detaching and Attaching the Front Panel Detaching 1 Turn off the unit power. 2 Press e at the lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out. AUDIO/SETUP Accessory List • Head Unit 1 • Power Cable 1 • Microphone 1 • Mounting Sleeve 1 • Carrying Case 1 • Bracket key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set Turning Power On and Off Press SOURCE to turn on the unit. Note • The unit can be turned on by pressing any other button except and e. Press and hold SOURCE for at least 2 seconds to turn off the unit. Note • The first time power is turned on, the volume will start from level 12. Source Selection Press SOURCE to change the source. HD RADIO SIRIUSXM*1 DISC USB AUDIO/iPod*2 BT AUDIO*3 BT PANDORA*4 AUXILIARY*5 HD RADIO *1 Displayed only when a SiriusXM Tuner is connected. (CDE-HD138BT only) *2 Only when the iPod/iPhone is connected. *3 Only when AUDIO is set to ON. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 27. *4 Only when BT PANDORA is set to ON. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 27. *5 Only when AUX SETUP is set to ON. For details, refer to "Setting the AUX SETUP Mode" on page 23. Notes • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction. Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit. Notes • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. Initial System Start-Up Be sure to press the RESET button when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Remove the detachable front panel. 9-EN